B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs
(125 reviews)
Price: $55.00
In Stock
B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs
Item # BWBMHD30010
Our Price: $55.00
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (125)
- Q & A (0)
- Photos
B and W Trailer Hitch Ball Mount - BWBMHD30010
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- No Ball
- 16000 lbs GTW
- Class IV
- B and W
- Steel Shank - Gloss Black
- 1-1/4 Inch Ball Hole Diameter
Heavy-duty, sturdy steel ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Sturdy steel construction
- Corrosion-resistant, high-gloss black powder coat finish
- Both drop and rise positions available to ensure level towing
- Hitch pin and clip or hitch lock sold separately
- Made in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 16,000 lbs
- Tongue weight: 1,600 lbs
- Length: 8-1/2" from center of hitch pin hole to center of ball hole
- Rise: 1" from top of inside of hitch opening
- Drop: 2" from top of inside of hitch opening
- Ball hole diameter: 1-1/4"
- Pin hole diameter: 5/8"
- Shank length: 6"
- Limited lifetime warranty
BMHD30010 B and W Class V Ballmount - 2" Drop, 1" Rise - 16,000 lbs
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs - BWBMHD30010
Average Customer Rating: 4.9 out of 5 stars (124 Customer Reviews)
Heavy-duty, sturdy steel ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.by: Jon01/27/2023
I have used B&W hitches for many years and I've been very happy with the quality of their products. etrailer makes it easy to shop for these hitches since the B&W site is terrible. I was able to find the correct size and all dimensions were listed clearly. Thanks again!
by: Andy 10/10/2023
heavy solid fits thanks
by: David 04/12/2023
It is refreshing to still see American companies selling “Made in USA” quality these days.
by: James 04/26/2023
Great product would purchase again.
by: Alan 01/21/2022
Really heavy duty solid steel 2 inch square, really thick steel tongue and and tight fitting hole for the ball bolt so little chance of ball rattle or slipping. Nice smooth welding and finish.
by: David01/21/2021
Ball mount is awesome and super high quality and heavy duty over and above what I will need to tow my 7000 pound car trailer but I like it that way! Great job to everyone involved. My hat is off to the fabricators, made in USA Mount arrived without a nick, perfect weld marks and flawless show quality paint job. I may not even use it, it is that nice. Maybe put it in a display case and start a collection. Fast shipping, 2 days
by: Lorenzo05/03/2018
Product is extremely heavy duty. much more than I will need, but I appreciate quality made is USA products. Etrailer packaging not so great. Box was torn by weight of this item, which caused a chip in the finish of the item.
by: Joe03/23/2017
Solid shaft, weighty, but expecting a long life from it. I'll have to hunt around for someone who has the right tool for getting [torque specs] on the ball, but shouldn't be a big problem. Package tracking was excellent and on time.
by: Ruben07/26/2018
Made from solid bar stock. B&W Made in the USA can not go wrong. Thank you Stacy for helping me order this product.
by: David09/27/2021
etrailer is the best.
by: Tom 08/20/2018
Excellent quality, made in USA.
by: Steve09/03/2021
Very nice, heavy duty and worth the extra couple of bucks, plus Made in USA.
by: Ron M03/10/2020
Does great job when needed
by: George B07/09/2016
Seems like a quality product, nothing special but general build quality is overall good.
by: Brandon 03/06/2017
Good quality. Does what it's supposed to do.
by: Al05/05/2018
Product was received just as listed, prompt service and shipping,
by: Carl04/18/2018
Heavy duty. Made from a solid piece of steel. Looks good well made
by: Sean 07/08/2022
Worth the money. Best in class.
by: John 10/02/2019
Everything came in ahead of schedule and in perfect condition
by: Oregon12/27/2021
Nice mount.
by: MN06/10/2017
Very sturdy high quality product.
by: JOHN05/08/2014
EVERYTHING WORK OUT GREAT.
by: Jason 11/12/2021
Heavy duty and exactly what I was looking for.
by: Allen 03/09/2024
by: Jim 05/14/2024
25
392
Show More Reviews
See what our Experts say about this B and W Trailer Hitch Ball Mount
- Will The Draw-Tite Trailer Hitch # 41906 Fit 2007 Ford Econoline E-350 XLT With Spare TireI contacted our representative at Draw-Tite about the Draw-Tite Trailer Hitch, part # 41906, he informed me that part # 41906 will fit your 2007 Ford Econoline E-350 XLT that has the factory spare tire. You will be able to access your factory spare tire while the Draw-Tite Hitch # 41906 is mounted to your vehicle. To complete your towing setup, you may be interested in the following items: B&W Ball Mount, part # BWBMHD30010 2-5/16 Inch Hitch Ball, part # 19286 2 Inch Hitch Ball, part #...
view full answer... - Compatibility of Curt Class IV with Spare Tire of 2013 Ram 1500 STThe rearmost frame cross member or bumper beam of your Ram is essentially the OEM hitch minus the receiver opening. The OEM hitch can be completed so to speak using the Curt # 13333 which would provide a capacity of 6,000 lb gross towing/ 600 lb tongue weight. In order to achieve a higher tongue weight capacity (10,000 GTW/1,00TW), you would need to use the Curt Class IV # 14374 that uses the frame members for its two forward-most attachment points and the bumper beam for its rear attachment...
view full answer... - 2-5/16 Hi-Rise Ball Options For Additional HeightWe have 2 high rise hitch balls that have the 2-5/16 inch diameter, and they both have the 1-1/4 inch shank. We have the 2 inch rise # C40034 and the 1 inch rise # C40033. There is not a 2-5/16 inch hitch ball that has a 1 inch shank. If you want a ball mount that will work with this, I recommend the B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs # BWBMHD30010.
view full answer... - How to Pick Out the Correct Rise/Drop Ball Mount to Tow a Trailer LevelThe amount of drop you would need for a ball mount to use with your 2012 Range Rover Sport will depend largely on the trailer you plan on towing. The goal is to pick a ball mount that will allow your trailer to be towed as level as possible. To see how to pick out the correct ballmount rise/drop check out the FAQ article I attached to the right. It covers everything. Once you know what drop you need I also attached a link to the right that has all of the ball mounts we carry. You will...
view full answer... - Ball Mount Recommendation Rated for 14,000 Pounds Gross Trailer Weight on a Ford F-450To determine the receiver size you have, I have included a link to an FAQ that will help. The Reese 2-1/2 inch Titan ball mounts like # RP45323 or the one found in # EBMK25318, tend not to fit the factory 2-1/2 inch receivers on Ford Super Duty trucks. You will need to use one of the Convert-A-Ball ball mounts. We have # AMSCV-6 with a 6 inch drop or 4-3/4 inch rise. We also have # AMSCV-4 with a 4 inch drop or 2-3/4 inch rise. And then we have # AMSCV-2 with a 2 inch drop or 3/4 inch...
view full answer... - Ball Mount Recommendation for Draw Tite Hitch for 2007 Toyota TundraIt sounds like maybe you are looking for just a ball mount to go along with a hitch that you have installed on your 2007 Toyota Tundra. The recommended ball mount to go along with the hitches that are sold for the 2007 Toyota Tundra is the B&W part # BWBMHD30010. This ball mount can do a rise of 1 inch and a drop of 2 inches. The best way to pick out a ball mount is to first determine how much rise or drop you would need to tow your trailer level. To see how this would be done check out...
view full answer... - Will Curt Trailer Hitch # C15300 Fit a 1997 Ford F-350 Without Removing the Spare TireAccording to Curt, if you install trailer hitch # C15300 on your 1997 Ford F-350, the spare tire will need to be temporarily lowered for hitch installation, but it does not have to be removed. The hitch is designed to fit the larger 37-1/4 inch frames. While you do not have to remove the spare tire, it may need to be repositioned once the hitch is in place. I have included a link to the installation details for reference. The recommended ball mount for this hitch is # BWBMHD30010 and you...
view full answer... - Class IV ball Mount and Ball Recommendations for a 2 Inch Trailer Hitch ReceiverWe have numerous ball mount styles and capacities that fit in a 2 inch trailer hitch, see link. For a Class IV with 16,000 pound capacity, the most popular options is # BWBMHD30010 if you are looking for a standard fix ball mount. For a ball you can use # A-90 for a 2 inch or # 19286 for a 2-5/16 inch. If you are looking for a pintle hook combo, you could use # TR63041. The ball capacity on this one is 7,000 pounds and the pintle capacity is 12,000 pounds. For the same set up but with...
view full answer... - Will Spare Tire Interfere with Trailer Hitch Installation on a 1978 GMC C/K Series Pickup TruckThe Curt trailer hitch # C14082 is designed to attach to the bottom of a 34 inch wide frame on a cab and chassis model 1978 Chevy C/K series pickup. If the spare tire fits between the frame rails then it will not be a problem, otherwise it would need to be relocated or the mount modified. If you do not have a cab and chassis model truck this hitch will not fit. I have linked the instructions for you to view. I have also linked the other hitches for your truck in case you do not have a...
view full answer... - Is Adjustable Ball Mount Available That Uses Hitch Ball With 1-1/4 Inch ShankThe ball mounts we offer that use a ball with a 1-1/4 inch shank are all fixed mounts like part # BWBMHD30010, This ball mount features a 1 inch rise or 2 inch drop and is rated for up to 16,000 lbs. Another ball mount that uses a 1-1/4 inch ball shank is part # 40331. This features a 3 inch rise or 4 inch drop. We do not offer an adjustable ball mount that can accommodate a hitch ball with a 1-1/4 inch shank.
view full answer... - Which Trailer Hitches, Accessories, and Wiring Fit a 2008 Ford E-350 VanI read through the instructions for the Draw-Tite hitch, # 41546, and while it does mention the E-350 a couple of times, I cross referenced your 2008 Ford E-350 with the Draw-Tite catalog and fit guide I have. This hitch was not recommended for the E-350 as there are hitches that are a more ideal fit for the E-350. For your 2008 Ford E-350, I recommend the Draw-Tite Hitch, # 41926. This is a Class IV hitch with 1,000 pounds of tongue weight capacity and 10,000 pounds gross trailer weight....
view full answer... - Draw-Tite Hitch # 75140 Recommendation for a 1987 Dodge Van B 250 SportsmanYes, this Draw-Tite Ultra Frame Trailer Hitch Receiver # 75140 that you referenced would work on your 1987 Dodge B 250 Sportsman Van. I attached installation instructions for you to check out if you like also. You may be interested in the following products to complete your towing setup: 4-Pole Hardwire Kit Including Circuit Tester # 18252 Ball Mount # BWBMHD30010 Hitch Ball # 19286 Hitch Ball # A-90 Pin and Clip # PC3
view full answer... - Will Curt Trailer Hitch # 14053 Fit a 1997 Ford E-Series Van with a Factory Step BumperThe Curt trailer hitch # 14053 will fit on your 1997 Ford Clubwagon with the factory step bumper. The spare tire will need to be temporarily removed to install the hitch and then put back in place, or further forward if needed, after installation. I have included a link to the installation instructions for you. Because your van has a step bumper, you may need a longer ball mount. To determine if a longer ball mount is needed, with the hitch installed measure from the center of the hitch...
view full answer... - How Does B&W Trailer Hitch Mount to a 1975 Chevy 1-Ton Dually Pickup TruckOn B&W trailer hitch # BWHDRH25122 the mounting brackets are oriented the same for all applications. The tabs point in but attach to the bottoms of the frame rails. The customer submitting photo appears to have some other component installed. The upper brackets in that picture are not part of the hitch assembly. They appear to be bumper brackets. Once installed the receiver should be right under the bottom of the bumper of very close especially since you have a stock bumper on your 1975...
view full answer...
- Trailer Hitch for 2009 Ford E-150 VanWhen Draw-Tite hitch # 75703 is installed on your 2009 Ford E-150 van you WILL be able to re-install your spare tire. Removing the spare for hitch installation simply makes it easier to get to the attachment points on the vehicle frame. When you re-install the spare you might only need to shift it's position slightly but it will go back on just fine. I have linked the written instructions, an install video and a helpful article to assist you with your install. The only special tool needed...
view full answer... - B&W Trailer Hitch and a Wiring Harness for a 2001 Chevy Silverado 2500HD with 6-1/2 Foot BedYes, B&W trailer hitch # BWHDRH25182 will fit your 2001 Chevy Silverado 2500HD with 6-1/2 foot bed. I have included a link to the installation instructions for you and a video showing an example installation on a similar truck. The recommended ball mount is # BWBMHD30010 which has a 1 inch rise or 2 inch drop. If you need a pin and clip use # PC3. For a 2-5/16 inch ball use # 19286. For a 2 inch ball, # A-90 will fit. And if your truck does not have a trailer connector already I recommend...
view full answer... - Will Curt Trailer Hitch, # C15323 Fit a 2011 Chevy Silverado V-6, 2-Wheel DriveThe Curt Trailer Hitch, # C15323, is designed to fit a 2011 Chevy Silverado 1500 series, so it should fit your truck. I have included a link to the installation details. The recommended ball mount for this hitch is # 40331 or # BWBMHD30010, and you can use ball # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, you can use Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End, # HM40975. I have included a video below showing a typical...
view full answer... - Which Ball Mount for a 2007 Chevy Silverado Z-71Typically a 2 inch drop is the most common for a Silverado. I have added links below to our ball mounts and a ball mount help page.
view full answer... - Will Draw-Tite Trailer Hitch # 41906 Fit Around the Spare Tire on a 2008 Ford E-350 VanThe Draw-Tite Trailer Hitch, # 41906, is designed to fit around the factory spare tire on your 2008 Ford E-350 Van. So you will not have to remove the spare tire in order to install this hitch. It may be beneficial to temporarily remove it to make installation easier. I have included a link to the installation instructions and a link to a video showing a typical installation for you to view. If you plan to do some towing the recommended ball mount is # BWBMHD30010, and you can use pin...
view full answer... - Recommended Class V Hitch for 2006 GMC Sierra for Towing 10,800 lb BoatI'd recommend upgrading that hitch, ASAP. If the hitch fails while you're towing, causing an accident, your insurance company would be well within their rights to deny you coverage which would leave you wide open to all kinds of legal liability. Not a pretty situation. Usually, Class V hitches do indeed have a 2-1/2 inch receiver tube. However, companies like Curt Manufacturing, Draw-Tite and B&W have developed Class V hitches with a 2 inch receiver tube that are strong enough to be classified...
view full answer... - Where Is The Brophy Ball Mount # EA60 ProducedThe Brophy Ball Mount # EA60 is produced overseas, I recommend The B&W Heavy-Duty Ball Mount - 1 inch Rise, 2 inch Drop - 8-1/2 inch Long - 16,000 pounds # BWBMHD30010 is made in the USA. I also recommend The 2-5/16 inch Hitch Ball - 1-1/4 inch Diameter x 2-3/4 inch Long Shank - Chrome - 12,000 pounds # 19286, and The Pin and Clip for 2 inch and 2-1/2 inch Hitches - 5/8 inch Diameter x 3-1/4 inch Span # PC3. I attached a review video link below.
view full answer... - Is Curt 2-Inch Hitch Ball A-90 Compatible with B&W Heavy-Duty Ball Mount BWBMHD30010The B&W Heavy-Duty Ball Mount # BWBMHD30010 requires that the hitch ball have a shank diameter of 1-1/4-inches. The 2-inch Curt hitch ball # A-90 has this size shank and will work fine. For a 2-5/16-inch hitch ball you can use # BWHB94050.
view full answer... - B&W Trailer Hitch Options for a 2007 Chevy Silverado Classic 2500 with 8 Foot BedWe don't have a picture but I can tell you that once installed trailer hitch # BWHDRH25187 will have its receiver directly below the bumper and the face of the receiver will be basically flush with the rear bumper. Please note that this hitch is designed to fit a 2007 Chevy Silverado Classic 2500 with an 8 foot bed AND 10 inch step bumper. If the truck has the regular step bumper you would use # BWHDRH25189. It will also be right under the rear bumper and the receiver will be about flush...
view full answer...
- Is a Ball Mount Spacer Available for a Hitch Ball with a 1 Inch Diameter ShankTo use the Curt 2 Inch Trailer Ball, # 40038, with the B&W Ball Mount, # BWBMHD30010, you will want to use the Reese Hitch Ball Bushing, # 58184. This will not reduce the towing or tongue weight capacity of the hitch ball or the ball mount, but you will be limited to the 12,000 lb towing capacity of the hitch ball since it is the lowest rated component.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Written by:
Lindsey S
Video Edited:
Jacob T
Expert Research:
Adam R
Installed by:
Cole B
Installed by:
Adam E
Video by:
Chris R
Updated by:
Kristina F
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ronald M.
3/11/2021
Very good